Modeling, takeoffs & cut/fill — agreed scope
ForgedOps prepares model-building, quantity-takeoff, earthwork, cut/fill, stringless curb/paving and millimeter-guided paving/milling model deliverables from the customer's supplied CAD files, PDF drawings, project specifications and written clarifications. We do not originate the project's engineering design, drawings or specifications. The accepted written proposal or Engagement Agreement identifies the project, purpose, source revisions, limits, assumptions, formats and deliverables. We use reasonable care and skill for the agreed service; we do not promise error-free deliverables, exact field quantities, a successful bid, a particular profit, or a guaranteed construction outcome.
The customer supplies complete, current and authorized CAD files, PDF drawings, specifications, survey/control information and revisions, identifies the controlling approved documents, and discloses known conflicts or missing information. Unless verification is expressly included, we rely on those inputs without independently certifying their accuracy or completeness. We review them for the agreed task and flag discrepancies, conflicts or omissions we reasonably identify; this is not a comprehensive design or constructability audit and does not guarantee discovery of every defect. Responsibility for an error depends on its cause and the agreed scope.
RFIs, engineering answers & revised source files
When source information is missing, ambiguous or inconsistent, ForgedOps documents the issue and requests clarification. The customer is responsible for submitting RFIs to the engineer of record or other authorized project designer, obtaining written answers and approved revisions, and delivering those answers and updated source files to ForgedOps. We do not substitute our own engineering judgment or silently redesign a detail to resolve a conflict.
The affected portion of the work remains on hold until adequate written clarification is provided. Unaffected work may proceed only where it can be separated reliably. Any assumption used for preliminary review must be explicitly identified and must not be treated as approval to construct unresolved work. The customer must tell us when an RFI answer or revision supersedes previously supplied information.
Additional review, re-modeling or quantity revisions resulting from changed or corrected customer/design-team inputs may change the fee or delivery date; we confirm the change with the customer before performing that additional work. A correction required because we failed to follow the agreed inputs or standard of care is not automatically a billable customer change.
Quantity assumptions & field conditions
Takeoffs and cut/fill calculations represent the supplied information and documented assumptions, not a warranty of actual excavated, imported, exported, placed or payable quantities. The scope must identify relevant measurement rules, units, boundaries, surfaces and exclusions, and any assumptions for shrink/swell, compaction, stripping, unsuitable material, over-excavation, waste, tolerances and material classifications.
Actual ground, rock, groundwater, utilities, buried obstructions and subsurface conditions may differ from drawings and models. Geotechnical investigation, utility locating, boundary determination, field surveying and independent verification are excluded unless lawfully and expressly included in the agreed scope. Before bidding, ordering materials, setting grades or directing equipment, the client and responsible project professionals must review the deliverables against current contract requirements and appropriate field checks.
Model validation, revisions & permitted use
Before construction or machine-control use, the responsible project team must confirm the intended file version and equipment compatibility, units, coordinate system, datum/geoid, localization/calibration, base position, antenna/tool offsets, boundaries and critical elevations, and independently check results against known control and approved project documents. Preliminary or review files must not be used as final construction instructions. Stop affected use and notify us if a discrepancy is found. Any required millimeter-guided paving or milling precision and acceptance criteria must be stated in the written scope. Model delivery alone does not warrant an installed tolerance; field performance also depends on control, calibration, equipment, operation and site conditions.
Only the identified final revision may be used for the agreed project and purpose, subject to the applicable license and contract. Reuse on another project, third-party reliance, conversion, alteration or use after superseding revisions requires appropriate review and written authorization. We are not responsible, to the extent permitted by law, for errors or losses caused by unauthorized changes, outdated files, incompatible systems or use outside the agreed scope. These checks do not excuse our failure to perform the agreed work with reasonable care.
Licensed work & construction responsibilities
These engagements do not include originating engineering design, preparing or sealing engineering drawings or specifications, certifying surveys, or replacing the customer's engineer or surveyor of record. The customer retains the responsible design professionals for engineering decisions, RFI responses, design corrections, approval and any required professional review or sealing. If requested work requires a regulated professional service outside our lawful scope, it must be referred to appropriately licensed and authorized professionals before proceeding. Calling a deliverable a model or takeoff does not remove licensing requirements.
Unless lawfully and expressly included in our written scope, construction means and methods, site safety, excavation protection, equipment operation and contractor compliance remain with the parties responsible for that work. A model alone is not a certification that a site is safe to excavate or that utilities, property boundaries or subsurface conditions are fully represented.
Corrections, changes & events beyond control
Notify ForgedOps promptly of suspected errors, preserve the affected files and revision information, and allow a reasonable opportunity to investigate and correct our work. We will address errors attributable to our failure to meet the agreed scope and standard of care, subject to the Engagement Agreement and applicable law. This notice procedure does not remove remedies that cannot lawfully be limited.
New plans, changed site conditions, revised quantities, added work limits or outputs, and changes requested after the agreed source revision may require additional fees and a revised schedule, agreed before that extra work begins. We do not undertake continuing monitoring or automatic revision updates unless included in writing.
Timing depends on timely inputs, review and access. For a material event beyond a party's reasonable control, the affected party must give prompt notice, take reasonable mitigation steps and discuss revised timing and any affected work. Changes to payment, cancellation or other contractual obligations require the applicable agreement or law; this paragraph is not a blanket release from performance.
Service liability & written engagement terms
TO THE EXTENT PERMITTED BY APPLICABLE LAW AND EXCEPT AS PROVIDED IN AN ACCEPTED ENGAGEMENT AGREEMENT, FOR COMMERCIAL MODELING, TAKEOFF AND CUT/FILL SERVICES, FORGEDOPS WILL NOT BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL ECONOMIC LOSS, INCLUDING LOST PROFITS, LOSS OF USE OR PROJECT DELAY. Rework, regrading, material or equipment costs fall within this exclusion only to the extent they are legally classified as those types of loss; direct damages are not automatically excluded by their label.
Any project-specific liability cap, insurance requirement, allocation of risk or indemnity must be expressly stated in the accepted Engagement Agreement and must comply with applicable law. These website terms do not create a promise to indemnify ForgedOps for its own negligence or override public-project requirements.
Nothing here excludes liability for fraud, gross negligence, willful misconduct, personal injury, physical damage to other property, or any liability, duty, warranty or remedy that cannot lawfully be excluded or limited. No limitation applies where prohibited or where a mandatory remedy must remain available. An accepted Engagement Agreement controls over inconsistent website terms, subject to applicable law; later website changes do not retroactively change an existing engagement.
Mount installation, inspection & accuracy
ForgedOps mounts are mechanical mounting accessories, not a guarantee of survey, positioning, elevation, layout, grading or machine-control accuracy. These responsibilities apply to all ForgedOps base-station and rover mounts, as appropriate to each product’s intended use.
The purchaser and operator are responsible for compatible equipment, a sound support and footing where applicable, secure installation, inspection and maintenance, correct receiver settings and antenna height, site localization/calibration, and verification against independent known control before work and after movement, impact or any disturbance. Stop use if the assembly is damaged, loose or unstable. Do not use mounts as steps, lifting points, tie-downs or fall-protection anchors.
To the extent permitted by law, ForgedOps is not responsible for errors or loss caused by improper installation, inadequate support, incorrect settings or control data, failure to verify accuracy, abuse, impact, overloading, improper maintenance, alteration, or continued use of a damaged or unstable assembly. The Product Purchase Terms describe commercial economic-loss limitations. These provisions do not remove stated product-defect remedies or exclude liability for fraud, gross negligence, willful misconduct, personal injury, physical damage to other property, or rights and liability that cannot lawfully be limited.
Physical Product Purchases
BASEPOINT purchases are also governed by our Shipping, Returns & One-Year Limited Warranty policies. Those Product Purchase Terms, including GNSS setup responsibilities and commercial loss limitations, are incorporated into physical-product purchases and control over these general website terms for product shipping, returns, warranty, and use. Website availability disclaimers do not remove product warranty coverage or statutory consumer rights.
Acceptance of Terms
These Terms of Service govern your access to and use of the ForgedOps website, proprietary operational platforms, white-labeled deployments, training programs, and related services (collectively, the “ForgedOps Services”) operated by ForgedOps LLC (“ForgedOps,” “we,” “our,” “us”).
By accessing this site, requesting a consultation, engaging ForgedOps for operational consulting, deploying a ForgedOps platform, or using any branded portal or system we deliver, you agree to be bound by these Terms. If you do not agree, do not use the ForgedOps Services.
Proprietary Systems & Intellectual Property
ForgedOps designs, develops, and deploys proprietary operational systems and infrastructure built from real-world heavy civil and infrastructure operations experience. All ForgedOps systems, platforms, workflows, training content, branded deployments, and supporting materials are protected as proprietary intellectual property.
Without limitation, the following are owned by ForgedOps LLC and may not be copied, redistributed, reverse-engineered, or repurposed without written authorization:
- Proprietary operational platforms and field workflow engines
- Proprietary operational intelligence systems and dashboards
- Custom proprietary workforce platforms and onboarding kits
- White-labeled deployments and customer-branded operational ecosystems
- Proprietary training curricula, OSHA outreach materials, and field documentation templates
- Operational reporting structures, approval-chain logic, and field sign-off architectures
- Bilingual workflow content, terminology libraries, and translation systems
- Brand assets including the ForgedOps name, marks, lockups, and visual identity
Limited License to Use the Site
Subject to these Terms, ForgedOps grants you a limited, revocable, non-exclusive, non-transferable license to access and view this website for the purpose of evaluating our services. No other rights are granted by implication, estoppel, or otherwise.
You may not scrape, mirror, frame, or otherwise reproduce any portion of this site or its proprietary content for commercial purposes without prior written consent.
Engagement & Deployments
Specific consulting engagements, training programs, and platform deployments are governed by a separately executed Master Services Agreement, Statement of Work, or platform deployment agreement (“Engagement Agreement”). The Engagement Agreement controls in the event of conflict with these Terms.
ForgedOps platform deployments are typically delivered as white-labeled, customer-branded operational systems. Customer-specific configurations, brand application, and workflow customizations remain subject to the licensing and ownership terms of the applicable Engagement Agreement.
Customer Data & Confidentiality
ForgedOps treats customer field data, project information, crew records, safety documentation, and operational reporting captured through our platforms as confidential, in accordance with the applicable Engagement Agreement and our Privacy Policy.
ForgedOps does not sell customer operational data. Aggregated, anonymized operational benchmarks may be used internally to improve platform capabilities and field-tested workflows.
Acceptable Use
You agree not to use the ForgedOps Services to: (a) violate applicable laws or regulations; (b) infringe ForgedOps or any third-party intellectual property; (c) disrupt platform operations or attempt to gain unauthorized access; (d) introduce malicious code; or (e) misrepresent your identity, role, or authority when requesting consultations or accessing branded portals.
Disclaimers
The ForgedOps website and informational content are provided “as is.” ForgedOps does not warrant that the site will be uninterrupted, error-free, or available at all times. Operational outcomes from any consulting, training, or platform engagement depend on field conditions, customer adoption, and execution.
Nothing on this website constitutes legal, safety, regulatory, or engineering advice. OSHA, DOT, and FAA compliance remain the responsibility of the operating contractor.
Limitation of Liability
To the fullest extent permitted by law, ForgedOps LLC, its officers, employees, and contractors shall not be liable for any indirect, incidental, special, consequential, or punitive damages arising out of or related to your use of the ForgedOps website, except as expressly set forth in an applicable Engagement Agreement.
Modifications
ForgedOps may revise these Terms from time to time. Material changes will be reflected in the “Last updated” date above. Continued use of the ForgedOps Services after changes constitutes acceptance.
Governing Law
These Terms are governed by the laws of the State of Florida, without regard to conflict-of-law principles. Disputes shall be brought exclusively in the state or federal courts located in the State of Florida, unless otherwise agreed in writing.
Contact
Questions about these Terms or proprietary licensing inquiries can be directed to our operations team via the Contact page.
